Sharp SD-AT50 - Basic Operation; To Locate the Beginning of a Chapter (Track) (Skip); Fast Forward;Fast Reverse (Search)

While a disc is playing, press the ~ or ~ button.
• The ~ button skips to the next chapter (track).
• The
~ button skips to the beginning of the current chapter (track). Press the
~ button again to skip to the beginning of the previous chapter (track).
------+ x 8 (about 8 times)
~ i
x 2 (about 2 times)
• The scanning speed will change as follows at each press of the button.
2 Press the DVD/CD ~ button to return to the normal playback.
x 60 (about 60 times) .-- x 30 (about 30 times)
• The disc
is forwarded by the ~ button and reversed by the ~ button.
r
1 While a disc is playing, press the ~ or ~ button.
Example: When the ~ button is pressed
II Fast forward/Fast reverse (search)
You can search the desired point as you play the disc.
Notes:
• On some discs, the search function is disabled.
• On a DVD, search does not operate between titles.
• While searching on a DVD, the sound
is not heard and the subtitles do not appear.
• For audio CDs, the scanning speed
is fixed to 16 times. The sound will break up
during search, but this is not faulty.
• When search
is performed during the DVD playback, pictures may not be for-
warded or reversed
in the search speed specified in this manual, depending on
the disc or the scene being played.
• The same operation can be performed by holding down the
~ or ~ button on
the DVD player for 2 seconds or more.
DIRECT
o
G)®@)
0®®
0®®
(§~
CD
C!)
[Back][Front]
II To locate the beginning of a chapter (track)
(skip)
1m CD, •
You can skip the current chapter (track) to the next.
Notes:
• The skip feature is disabled on some discs. Some discs do not display the chapter
(track).
•
On a DVD, skip does not operate between titles.
• The same operation can be performed by pressing the
~ or ~ button on the
DVD player.
Basic operation
SD-AT50
DX-AT50
E-29