Sharp SD-AT50 - System Installation

Correct
With the supplied stands, they can be installed vertically.
II Installing AV control unit and DVD player
You can place them one above the other or side by side.
System installation
Note:
• If the display window of the DVD player is placed on the lower side, a disc may fall
or may not be ejected.
• Avoid changing the
DVD player installation (vertical or horizontal) while a disc is
playing. The disc may be scratched.
Caution:
When installing the DVD player vertically, bring the display window to the
upper side.
When installed vertically, a 3
11
(8 cm) disc cannot be played.
Audio cable
(not supplied)
Red White
~~
~~
R L
To audio
output jacks
TV
To listen to TV sound via the speakers of this system:
Using the audio cable, you can listen to TV sound with this system.
(The audio cable is not supplied. Purchase a commercially available cable.)
TV connection (continued)
SD-AT50
DX-AT50
E-15