Sharp SD-AT50 - MP3 Disc Operation; MP3 Disc Playback

SD-AT50
DX-AT50
MP3 disc operation
2 Press the A, ~, .... or ~ button to select a track and press the DVDI
CD ~ button.
Pressing the TOP MENU button goes back to the uppermost layer.
1/15 ...
Notes:
• "+" appears in front of the album name.
• Maximum of 14 characters can be displayed for
an album name, and 25 charac-
ters for a track name. Underline, asterisk, and space may not be displayed.
• The system can recognize a total of 255 albums and tracks.
• The 9th or later layers cannot be played back.
• You can select a track for direct playback using the direct number buttons when
the screen display
is turned off.
• The screen displays up to 5 tracks for the programmed playback.
If more tracks
are entered, the next screen appears. Press the
~ or ~ button to switch the
screen.
• If you enter a wrong track, press the CLEAR button.
• To stop the programmed playback, press the DVD/CD • button twice.
Direct play:
1 Press the 01 RECT button.
2 Press the
A, ~, .... or ~ button to select a track and press the DVD/CD ~ button.
Programmed playback:
1 While in the stop mode, press the MODE button.
2 Press the
A or ~ button to select an album and press the ENTER button.
3 Press the
A or ~ button to select a track and press the ENTER button.
Press the
.... button to return to the album selection screen.
4 After programming
is completed, press the DVD/CD ~ button.
Caution:
If you convert MP3 data to "
au
dio COli data when recording on a CD-R/RW, play it as
an audio CD. The MP3 operation cannot be performed.
CLEAR
o
DIRECT
o
W®@
0®®
0®®
~~
[Back]
[Front]
FIRST PLAY
+ALBUt.,,]01
+ALBUM02
+ALBUfv103
+/l,LBUM04
I VOLUME LABEL
SELECT:
c/ ~ ENTER: C
RETURN:t] START: ~
TOP
DVO/CD
CD
MODE
r=:l
1 Load a disc containing MP3 tracks.
A menu screen appears.
o
II MP3 disc playback
You can play back CD-R/RWs recorded in the MP3 format.
E-33