SD-AT50
DX-AT50
Operating the connected
TV
[Front]
The connected TV can be operated with the remote control of this system. The fac-
tory setting allows you to operate Sharp's TVs and VCRs with
it.
To operate those of other manufacturers, change the contents registered
in
the
remote control (see page 40).
II
Watching
TV
II
Watching
images
from
digital
tuner,
VCR,
etc.
1
Press
the
TV ON/STAND-BY
button
to
turn
on
the
TV.
2 Press
the
TV CHANNEL (A
or
v)
button
to
set
the
channel.
3 Press
the
TV VOLUME (A
or
v)
button
to
control
the
TV volume.
To
enjoy
the
sound
from
the
speakers
of
this
system:
Turn on the system and press the FUNCTION button to select
IITV
II
.
• The DVD player automatically enters the power stand-by mode.
Caution:
Some Sharp TVs and VCRs cannot be operated with this remote control.
1
Turn
on
the
system
and
press
the
FUNCTION
button.
• For the digital tuner, select IIAUX
II
.
• For the videotape, select
IIVCR
II
.
2
Turn
on
the
digital
tuner, VCR, etc.
3
Press
the
TVNIDEO
button,
and
set
the
TV
to
VIDEO 1, VIDEO
2,
etc.
• When you watch images from digital tuner, press the DIGITAUANALOG but-
ton and select IIAUX ANALOG
II
or IIAUX DIGITAL
II
depending on the connect-
ed input terminal.
• When you watch a videotape, press the playback button of the VCR.
DIGITAL/
ANALOG
(
BAND
I
TV/VIDEO
I
1-1iIIBI8IIIIIIIB~-t
FUNCTION
I
1--~0&
E-47
To Next Page
Loading...
