Sharp SD-AT50 - To Brighten an Image (Black Level Setting); To Change the Angle; To Zoom in on an Image (Zoom)

~r~
ZOOM indicator
ZOOM
[x 4] ---+ ZOOM [OFF]
I
ZOOM [x 2] ---+
t
1 When II~II is displayed in the upper right corner of the TV screen,
press the ANGLE ~ button.
2 To shift the view and display the de-
sired part of a zoomed image, press
the., ~, ..... or ~ button repeatedly.
Each press of the ZOOM button cycles through the zoom settings as follows:
2 Within 5 seconds, press the ANGLE ~ button repeatedly to select
the desired angle number.
1 While a disc is playing, press the ZOOM button.
- To zoom in on an image (zoom)
You can magnify images during DVD playback.
Notes:
• An image may become distorted when zoomed.
• Subtitles cannot be zoomed.
• For the part currently viewed, refer to the indication
in the lower right section of the
screen.
Notes:
• Some DVDs prohibit changing the angle.
• The angle number
is not displayed if angles are not recorded on the disc.
• Refer to the manual of the disc as the operation may vary depending
on the disc.
- To change the angle •
You can change the angle of view when playing a DVD video disc that contains
scenes recorded from multiple angles.
BLACK
LEVEL
o
ANGLE
®
[Back]
( IBLACK LEVEL: ON
[Front]
ON
SCREEN _18IIII8II8I8II8~BII8l88I8IIIIII~
o
2 Within 5 seconds, press the BLACK LEVEL button repeatedly to
select
1I0N
II
or 1I0FF
II
•
1 While a disc is playing, press the
BLACK LEVEL button.
Various settings (continued)
- To brighten an image (black level set-
ting) •
The image can be adjusted during playback.
Setting
OFF Normal image
ON Bright image
SD-AT50
DX-AT50
E-35