Listening
to
the
radio
SD-AT50
DX-AT50
E-25
[Front]
ON/
STAND-BY
o
FUNCTION
",-
__
I
_p;;;~
e
DIGITAL/
ANALOG
I
BAND
1
e""""-TUNER
PRESET-/'..
e
1
Press
the
ON/STAND-BY
button
to
turn
the
power
on.
2
To
enter
tuner
function,
display
IIFMII
or
IIAM
II
by
pressing
the
FUNCTION
button.
The DVD player automatically enters the power stand-by mode.
3 Press
the
BAND
button
repeatedly
to
select
the
desired
frequency
band (FM
or
AM).
4
Press
the
~
or
~
button
to
tune
in
to
the
desired
station.
Manual
tuning:
Press the
~
or
~
button as many times as required to tune
in
to the desired
station.
Auto
tuning:
When the
~
or
~
button is pressed for more than 0.5 seconds, scanning will
start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
• When radio interference occurs, auto scan tuning may stop automatically at
that point.
• Auto scan tuning will skip weak signal stations.
• To stop the auto tuning, press the
~
or
~
button again.
To receive an
FM
stereo
transmission:
Press the BAND button to display the "STEREO" indicator.
• "ST" will appear when an
FM
broadcast
is
in
stereo.
FM
stereo receiving indicator
------S-TE-RE-O±OJom
'-"II
Iswl
,--" 0 0
"""
-
-,,-
-'.
,-
-,
MHz
FM
stereo mode indicator
• If the
FM
reception is weak, press the BAND button to extinguish the "STEREO"
indicator. The reception changes to monaural, and the sound becomes clearer.
After
use:
Press the ON/STAND-BY button to enter the power stand-by mode.
To Next Page
Loading...
