SD-AT50
DX-AT50
Useful features
2 Press
the
DVD/CD
~
button.
I
PROGRAM
TIME 0:00:00
1/11
1-
I
I
PROGRAM
TIME 8:88:88
1/1
I
I
02 05 07 04 10 14 06 15
21
08 I
20 28 10 25 35 12 30 42
11
34
49 16 40 58 18 45 63
01
03-
2 Enter a
track
number
with
the
direct
num-
ber
buttons.
1 While stopped,
press
the
MODE
button.
The programming screen is displayed.
• Repeat the procedure above if you want to enter other title numbers.
• If you enter the wrong number, press the CLEAR button and then reenter.
• When you enter a track number with 2 or more digits:
Example:
To select track 14:
3 Press
the
~
button
to
start
play.
• Programmed selections are memorized until a disc is removed.
• Playback
is
paused with
the.
button. When playback is resumed, pro-
grammed playback starts from the point you stopped.
• Pressing
the.
button twice turns off the programmed playback. If you start
playback after pressing the MODE button, programmed playback starts from
the beginning.
To
change
the
programmed
contents:
Repeat the above procedures from step
1.
Notes:
• Programming cannot be performed while paused or
in
the playback mode.
• Sequence programming does not work with a disc that does not include title infor-
mation.
• Sequence programming does not work with a disc that disables programming.
• To exit the programming procedure halfway through, press the RETURN
0-.
but-
ton.
• To check the status during the programmed playback, press the ON SCREEN or
the MODE button.
• Even if you press the
ON/STAN D-BY button to enter the stand-by mode or change
the function from DVD to another, the programmed selections will not be cleared.
II
To play in
the
desired
order
(programmed
playback)~D
You can play back the desired tracks
in
the sequence you want.
Maximum of 99 tracks can be programmed.
o
o
A-B
REPEAT
TOP
MENU
RETURN
o
REPEAT
( I
1 While
stopped,
press
the
MODE
button
r 1
twice.
j:=:=::=:::RANDOM
~I
ON
SCREEN
o
MODE
( I
To cancel random play:
Press the DVD/CD • button.
Notes:
• You may not be able to use this function with some discs.
• When all of the tracks have been played
in
random play, playback will stop auto-
matically.
• You cannot set the random play while
in
the playback or pause mode.
• Random play
is
not allowed during programmed playback.
• To check the status during random play, press the ON SCREEN button.
•
In
random play, the DVD player will select and play tracks automatically. (You can-
not select the order of the tracks.)
[Front]
II
To play in random
order
(random play)
,,~D,··
U
The tracks on the disc can be played
in
random order automatically.
E-31
To Next Page
Loading...
