Sharp SD-AT50 - Audio Connection of Other Equipment

Audio connection of other equipment
SD-AT50
DX-AT50
Digital equipment such as
an MD player
Optical digital cable
(option: AD-M3DC)
To optical digital audio
output jack
To optical digital
audio input jack
II Connection for the digital tuner sound (or
other optical digital equipment such as an
MD player)
You can hear the sound by connecting one of the audio cable or the optical digital
cable.
If you are using the digital tuner with the optical output jack, you can enjoy bet-
ter sound by connecting the tuner to the optical digital input jack of the AV control
unit.
Caution:
Turn off the other equipment before making this connection.
Notes:
• Change the audio between analog and digital with the DIGITAUANALOG button.
(page 47)
• Insert the plugs fully to avoid fuzzy pictures or noise.
• When connecting with
an optical digital cable, set the digital output of the digital
tuner to PCM. Refer to the operation manual of the digital tuner.
To audio
input jacks
Audio cable
(commercially available)
TV
VCR
II Connection for the VCR sound
Note:
Insert the plugs fully to avoid fuzzy pictures or noise.
Caution:
Turn off the other equipment before making this connection.
You can hear the sound of other equipment via this product. Connect VCR or digital
tuner to TV directly to receive the images (refer to the operation manual of each
equipment).
E-46