SD-AT50
DX-AT50
Maintenance
Specifications
The appearance of optional accessories may differ from the illustrations above.
• AV control unit
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values
in
individual units.
Dimensions Width: 8-1/2" (215 mm)
Height: 2-5/16" (58 mm)
Depth: 10-5/16"
(261
mm)
Weight 2.9 Ibs. (1.3 kg)
Audio input terminals Optical digital input (AUX): Square type x 1
Coaxical digital input (DVD/CD): RCA type
x 1
Analog input (DVD/CD): RCA type
x 1 pair (UR)
Analog input (TV): RCA type
x 1 pair (UR)
Analog input (VCR): RCA type
x 1 pair (UR)
Analog input (AUX): RCA type
x 1 pair (UR)
Audio output terminal Headphones: 16 - 50 ohms (recommended: 32 ohms)
Other terminals
System control x 3
Frequency range
FM: 87.5
~
108 MHz
AM: 530 - 1,720 kHz
TABLE SPEAKER STAND
OPTICAL DIGITAL CABLE
Model: AD-AT10LS
Model:
AD-M30C
FLOOR
SPEAKER
STAND
SPEAKER WALL BRACKET
Model: AO-AT10ST
Model: AD-AT10SA
• Cleaning the cabinet
Optional accessories
• Do not use chemicals for cleaning (gasoline, paint thinner, etc,).
It
may damage the
cabinet finish.
• Do not apply oil to the inside of the each
component
It
may cause malfunctions,
Use only the specified optional accessories to operate this product properly.
For speaker installation, read instructions supplied with stands or brackets.
• Cleaning the laser pickup lens
In
order to ensure proper operation of the OVD player, preventative maintenance
(cleaning of the laser pickup lens) should be performed periodically, Lens cleaners
are commercially available, Contact your local
DVO
software dealer for options.
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth,
E-51
To Next Page
Loading...
