Sharp SD-AT50 - Various Settings; To Change the Subtitle Language; To Change the Audio Language (Audio Output); To Select a Subtitle or Audio Language from the Disc Menu

Various settings
SD-AT50
DX-AT50
Example
II~ 1. ENG f!!I (DTS 5.1 Surround)
ENG
----.
FRE
----. ----.
SPA
t
I
Audio CD:
STEREO ----. L-CH
----.
R-CH
t I
1 While a disc is playing, press the AUDIO 0))
button.
1 While the disc is stopped or played,
press the MENU button to display
the disc menu.
2 Press the A, ~, ~ or ~ button to change the setting and press the
ENTER button.
You can also use the direct number buttons for some discs.
2 Within 5 seconds, press the AUDIO 0)) button repeatedly to select
the desired audio number.
DVD:
You can select one of the audio languages that are recorded on a DVD.
II To change the audio language (audio out-
put)
~ CD.
During playback, you can change the audio language (audio output).
Notes:
• The audio language on some DVDs may not be changed.
• For audio
lan~uage and audio system, refer to the manual of the disc.
II To select a subtitle or audio language from
the disc menu
~
You can select the desired subtitle or audio language and sound system (Dolby Digi-
tal
(5.1 ch) or DTS sound) on your DVD if it has a disc menu.
Note:
The procedure shown here provides only general steps. The actual procedure for
using the disc menu depends
on the disc you are using. See the disc jacket for
details.
AUDIO
@
SUBTITLE
~. 1.ENG/6
[Back]
[Front]
1 While a disc is playing, press the SUBTITLE bJ
button.
2 Within 5 seconds, press the SUBTITLE bJ but- ~
ton repeatedly to select the desired subtitle 11r-=.=--6.-FR-E/--'6 I
language.
Press the SUBTITLE bJ button and then the ~ or ~ button to hide the subtitle.
II To change the subtitle language ~
You can change the subtitle language or hide the subtitle during playback.
Notes:
• Some DVDs prohibit changing the subtitle language.
• If no subtitles are recorded
on the disc, "NOT AV AI LABLE" is displayed.
• It may take a little time to switch the subtitle language to the selected one.
• The subtitle cannot be hidden
on some DVDs.
The subtitle language and the audio language you select are reset each time you set
the DVD player to the stand-by mode or change the disc. To always play back the
DVD
in the preferred languages, set them in the initial setting screen (see page 19).
E-34