SD-AT50
DX-AT50
Antenna connection
TV connection
Video cable
(supplied)
To video output jack
TV
Notes:
• Change the TV input
in
accordance with the connected jack.
• Do not connect other equipment between the TV and the DVD player. If they are
connected via a VCR, pictures may be distorted.
II
Connecting to a TV with a video input jack
You can enjoy DVD images by connecting your TV and the DVD player with a video
cable.
Caution:
Before connecting the TV, turn off all the equipment.
Three types of jacks [VIDEO OUT (VIDEO), VIDEO OUT (S-VIDEO) and COMPO-
NENT VIDEO OUT] are available for TV and DVD player connection.
Connect according to your TV.
Outdoor
AM antenna
< Attaching to the wall >
Wall Screws (not supplied)
~
loop antenna
BQ
AMlJGNN
lr
J0
~
FM
OHMS
=AN
NNA
Note:
When using an outdoor AM antenna, be sure to keep the wire of the AM loop
antenna connected.
Outdoor
FM
or
AM
antenna:
Use an outdoor FM or AM antenna if you require better reception. Consult your
dealer.
Notes:
• Placing the antenna on the system or near the AC power cord may cause noise
pickup. Place the antenna away from the system for better reception.
• When static is still heard even after adjusting the position of the AM loop antenna,
try reversing the wire connections.
Installing the
AM
loop antenna:
<
Assembling>
Supplied AM loop antenna:
Connect the AM loop antenna wire to the AM
and GND terminals. Position the AM loop anten-
na for optimum reception. Place the AM loop an-
tenna on a shelf, etc., or attach it to a stand or a
wall with screws (not supplied).
Supplied
FM
antenna:
Connect the
FM
antenna wire to the
FM
75
OHMS jack and position the FM antenna wire in
the direction where the strongest signal can be
received.
E-13
To Next Page
Loading...
