Sharp SD-AT50 - System Connections; Connecting the Components

SD-AT50
DX-AT50
E-11
System connections
II Connecting the components
Connect the DVD player, AV control unit and subwoofer/amplifier unit as follows.
Connecting components
Cord
AV control unit
CD
Subwoofer/
CD
System connection cable
.. amplifier unit
(For sound, black)
®
Subwoofer/
®
System connection cable
AV control unit
... amplifier unit
(For signal/power, blue)
AV control unit
®
.. DVD player
®
System connection cable
(For DVD player)
AV control unit DI~~TD~~DIN ~ DVD player
AUDIO OUT
Digital audio cable *
DIGITAL
(For digital signal)
Commercially available
AV control unit ~~%~ ~ .. DVD player
AUDIO OUT ~
RCA cord
*
(For analog signal)
* Connect either a digital audio cable orcommercially available RCA cord. Press the
DIGIT
AUANALOG button to switch between digital and analog signals according
to the connection.
Caution:
• Make sure to connect the system after unplugging the DVD player and the sub-
woofer/amplifier unit.
• Put the 2 system connection cables (for sound and signal/power) together. If not,
noises may be heard.
To unplug the system connection cable: