104
Link PLU table (for PLU/UPC)
It is possible to link PLUs (linked PLUs) with a PLU or UPC (link PLU/UPC) so that with a single key
depression of the link PLU/UPC key. However, the number of links is a maximum of five. Even if more than
five PLUs are linked, the sixth or higher link is not actualized.
Program each item as follows:
• LINK PLU TABLE (Use the numeric entry)
Link PLU table number (1 thru 99)
• LINKED PLU#1 thru 5 (5 PLUs. max.)
Select linked PLUs (max. 5 PLUs) from the list.
NOTE
•
PLU codes should be defined before programming a link PLU
table.
•
If the
(DEL)
key is pressed on the table number selection menu,
the selected table will be deleted.
Selected link
PLU table no.
(ENTER)
To Next Page
Loading...
Need help?
General
