96
Article Programming
Use the following procedure to select any option included in the article programming group.
(ENTER)
(CANCEL)
PAGE
DOWN
PAGE
UP
1.
In the SETTING window, select “01 ARTICLE.”
• The ARTICLE window will appear.
2.
Select any option from the following options list:
1 DEPARTMENT: Departments
2 PLU/UPC: PLUs/UPCs
3 DYNAMIC UPC: Dynamic UPC
4 PLU RANGE: A range of PLUs
5 PLU STOCK: PLU/UPC stock quantity
6 LINK PLU TABLE: Link PLU table
7 CONDIMENT TBL.: Condiment table
8 MIX&MATCH: Mix & match table
9 COMBO MEAL: Combo meal table
10 SCALE TABLE: Scale table
11 UPC NON-PLU: UPC non-PLU type code format
12 UPC DELETE: UPC record delete period
The following illustration shows those options included in the article programming group.
1 ARTICLE 1 DEPARTMENT See “Department” on page 97.
2 PLU/UPC See “PLU/UPC” on page 99.
3 DYNAMIC UPC See “Dynamic UPC” on page 102.
4 PLU RANGE See “PLU range” on page 102.
5 PLU STOCK See “PLU/UPC stock” on page 103.
6 LINK PLU TABLE See “Link PLU table” on page 104.
7 CONDIMENT TBL. See “Condiment table” on page 105.
8 MIX&MATCH See “Mix & Match table” on page 106.
9 COMBO MEAL See “Combo meal table” on page 107.
10 SCALE TABLE See “Scale table” on page 108.
11 UPC NON-PLU See “UPC Non-PLU code format” on page 109.
12 UPC DELETE See “UPC delete” on page 110.
To Next Page
Loading...
Need help?
General
