175
Device Configuration Programming
Use the following procedure to select a device configuration programming:
1.
In the SETTING window, select “14 DEVICE CONFIG.”
• The DEVICE CONFIG window will appear.
2.
Select any option from the following options list:
01 R/J PRINTER: Receipt/Journal Printer (Bult-in
printer)
02 BILL (SLIP): Bill (Slip) printer
03 REPORT PRINTER: Report printer
04 VALIDATION (VP): Validation printer
05 KP#1: Remote printer #1
06 KP#2: Remote printer #2
07 KP#3: Remote printer #3
08 KP#4: Remote printer #4
09 KP#5: Remote printer #5
10 KP#6: Remote printer #6
11 KP#7: Remote printer #7
12 KP#8: Remote printer #8
13 KP#9: Remote printer #9
14 BCR(SCANNER): Scanner
The following illustration shows those options included in the device configuration programming group.
14 DEVICE CONFIG 01 R/J PRINTER See “R/J Printer” on page 176.
02 BILL (SLIP) See “Bill (Slip) printer” on page 176.
03 REPORT PRINTER See “Report printer” on page 177.
04 VALIDATION (VP) See “Validation printer” on page 177.
05 KP#1
06 KP#2
07 KP#3
08 KP#4
09 KP#5 See “Remote printer” on page 178.
10 KP#6
11 KP#7
12 KP#8
13 KP#9
14 BCR (SCANNER) See “BCR (scanner)” on page 179.
The screen continues.
To Next Page
Loading...
