Sharp UP-700 - R;J Printer (Built-In Printer); Bill (Slip) Printer

176
R/J printer (Built-in printer)
Program each item as follows:
• LIGHT&SHADE (Use the numeric entry)
Select a light and shade level. (00 to 99)
00: 65% for standard
50: 100% <standard>
99: 135% for standard
• IMAGE FOOT (Use the selective entry)
PRINT: Prints footer graphic logo.
NOT PRINT: Not print footer graphic logo.
• PRINT (Use the selective entry)
BUFFERING: The receipt/journal prints the recapitulated
data at the finalization.
REAL TIME: The receipt/journal print each data at same
time when each item is entered.
• TRAY ST FEED# (Use the numeric entry)
Tray subtotal feed line (0 to 9)
Bill (slip) printer
Program each item as follows:
• PRINTER (Use the selective entry)
Select the printer to be used.
EPSON TM-295 EPSON TM-T88/85
EPSON TM-T80 EPSON TM-U200
EPSON TM-T88(2) EPSON TM-300
• AUTO CUTTER (Use the selective entry)
Auto cutter function
YES: Enables auto cutter function.
NO: Disables auto cutter function.
(This item is invalid for TM-295.)
• INITIAL FEED# (Use the numeric entry)
Initial line feed for a slip (0 to 64 lines): only for TM-295
• SLIP MAX LINE (Use the numeric entry)
Maximum number of lines printable on a slip (0 to 99): only
for TM-295