167
Report Programming
Use the following procedure to select any option included in the report group:
1.
In the SETTING window, select “12 REPORT.”
• The REPORT window will appear.
2.
Select any option from the following list:
1 0 SKIP: Zero skip
2 HOURLY RPT: Hourly report
3 STACKED RPT: Stacked report
The following illustration shows those options included in the report programming group.
12 REPORT 1 0 SKIP See “Zero skip” on page 168.
2 HOURLY RPT See “Hourly report” on page 168.
3 STACKED RPT See “Stacked report” on page 169.
To Next Page
Loading...
