17
3
Time Display and Automatic
Updating of the Date
Time display
When you need the time displayed, press the
#/
TM
key while the POS terminal is in the REG
or MGR mode. The time display disappears as soon as you press the
CL
key in the REG or
MGR mode or begin a subsequent entry.
Automatic updating of the date
Once the internal clock unit is started at the desired time, it continues to run as long as the
battery pack is charged and will also update the date based on the calendar year.
Date
Time
This display appears by pressing
the
#/
TM
key.
Time (This display is held, even if the
CL
key is pressed.)
To Next Page
Loading...
Need help?
General
