182
Customer code
Program each item as follows:
• NAME (Use the character entry)
Enter a customer’s name (max. 16 characters)
• ADDRESS (Use the character entry)
On the second line, enter the customer’s address (max. 40
characters)
Customer programming
Program each item as follows:
• PERIOD:MONTH (Use the numeric entry)
Preset a period to delete customer detail data.
Enter the period in a unit of month. (01 to 99)
If you enter “00”, the customer detail data will not be deleted.
NOTE
If the following condition is satisfied, its code is deleted using the deleting operation.
Date of the deleting (Year, Month) Date of the last access (Year, Month) + programmed period + 1
[Ex.] Date of the deleting = 8/(1 to 31)/2002, Period = 12 months:
Customer Date of the last access
Customer A (6/(1 to 30)/2001) ➝ Deleted
Customer B (7/(1 to 31)/2001) ➝ Deleted
Customer C (8/(1 to 31)/2001) ➝ Kept intact
Select or enter the pertinent
customer code.
To Next Page
Loading...
Need help?
General
