58
The “COPY” symbol is printed on the copy receipt.
Validation Printing Function
The POS terminal can perform validation printing when it is connected with the slip printer. For the details of
slip printer, contact your authorized SHARP dealer.
1.
Set a validation slip to the slip printer.
2.
Press the
PRINT
key. The validation printing will start.
NOTE
Programmed compulsory validation printing can be overridden by performing the following
operation. If you need this function, contact your authorized SHARP dealer.
1. Move the mode key to MGR position.
2.
PRINT
Server Arrival/Departure Time Printing
The POS terminal will allow server’s arrival and departure time printing when it is connected with the slip
printer. For the details of the slip printer, contact your authorized SHARP dealer.
For printing, you must be in the REG mode.
Printing of arrival time
PRINT
1
Printing of departure time
PRINT
2
To Next Page
Loading...
