Sharp XV-Z17000 - Accessories; Supplied and Optional Accessories

Introduction
-9
Accessories
Supplied accessories
Lamp unit AN-K15LP
Ceiling-mount adaptor AN-60KT
Ceiling-mount bracket AN-XRCM30 (for U.S.A. only)
Ceiling-mount unit AN-TK201 <for AN-60KT>
AN-TK202 <for AN-60KT>
Ceiling-mount extension tube AN-EP101B <for AN-XRCM30>
(for U.S.A. only)
3 RCA to mini D-sub 15 pin cable (10' (3.0 m)) AN-C3CP2
3D Glasses AN-3DG10-S
AN-3DG10-R
AN-3DG10-A







Two AA size batteries
<UBATUA020WJZZ>
Remote control
<RRMCGA929WJSA>
Note
• Some of the optional accessories may not be available depending on the region. Please check with your
nearest Sharp Authorized Projector Dealer or Service Center.
Note
• Codes in “< >” are Replacement parts codes.
Optional accessories
Power cord
*2
For U.S. and
Canada, etc.
(6' (1.8 m))
<QACCDA007WJPZ>
(1)
*1 See pages 50 to 52 for details of the 3D Glasses and their accessories.
*2 Which power cords are supplied along with your projector depends on the region. Use the power cord that
corresponds to the wall outlet in your country.
• Operation manual <TINS-E929WJZZ>
(2)
For Europe,
except U.K.
(6' (1.8 m))
<QACCVA011WJPZ>
(3)
For U.K. and
Singapore
(6' (1.8 m))
<QACCBA036WJPZ>
(4)
For Australia,
New Zealand and Oceania
(6' (1.8 m))
<QACCLA018WJPZ>
Two pairs of 3D Glasses
*1
<KOPTLA002WJN1>
XV-Z17000EUS.indb9XV-Z17000EUS.indb9 2010/12/1711:16:092010/12/1711:16:09