Sharp XV-Z17000 User Manual

Useful Features
-51
Before Using the 3D Glasses
Before using the 3D Glasses for the fi rst time,
remove the insulating sheet attached to them.
Replacing the Button Cell
Battery
The battery has an expected service life of ap-
proximately 75 hours.
• When the battery power is low, the LED light
blinks six times after the power is turned on.
• When replacing the button cell, use only the
designated battery type (Maxell branded
CR2032 lithium button battery).
1
Loosen the screw used to secure
the battery cover, and then remove
the battery cover.
2
1
1
2
Remove the button cell battery.
1Place the tip of the slotted precision screw-
driver into the opening between the button
cell and the socket.
2Lift up the button cell while taking care not
to get the screwdriver caught on the metal
latch.
2
1
3
When the battery comes loose from
the socket, pick it out with your
fi ngers.
4
Hook a new button cell to the metal
latch and insert it into the socket.
Take care not to reverse the battery polarity
(+ and -) when inserting the button cell.
5
Close the battery cover.
6
Insert the screw to secure the bat-
tery cover.
Note
• Used batteries should be disposed in accor-
dance with local laws and regulations.
•
2
3
4
5
6
XV-Z17000EUS.indb51XV-Z17000EUS.indb51 2010/12/1711:16:372010/12/1711:16:37

Sharp XV-Z17000 Specifications

General

Matrix size	0.65 \
Projection distance	1.3 - 15.7 m
Vertical scan range	43 - 85 Hz
Horizontal scan range	15 - 110 kHz
Projection technology	DLP
Contrast ratio (dynamic)	40000:1
Contrast ratio (typical)	-
Screen size compatibility	40 - 500 \
Projector native resolution	1080p (1920x1080)
Aspect ratio	16:9
RS-232 ports	1
Maximum analog resolution	1600 x 1200 pixels
Maximum digital resolution	1920 x 1080 pixels
Focus	Manual
Zoom capability	Yes
Focal length range	21 - 24.2 mm
Aperture range (F-F)	2.5 - 2.7
Lamp power	250 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Supported video modes	1080i, 1080p, 480i, 480p, 540p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
Built-in speaker(s)	No
Serial interface type	RS-232
USB 2.0 ports quantity	0
Noise level	- dB
Noise level (economic mode)	23 dB
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	Black
Market positioning	Home cinema
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	8.3 W
Power consumption (typical)	353 W
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Depth	335 mm
Width	400 mm
Height	100 mm
Weight	5800 g