Sharp XV-Z17000 User Manual

Useful Features
-53
Note
• The screen may temporarily become black when
the projector is trying to detect a 3D image
signal and when switching from 3D to 2D mode.
Viewing 3D Images
Receiving a 3D Image Signal That
Can Be Detected Automatically
The image signal may contain a 3D identifi ca-
tion signal. You can enable the projector to
automatically detect the 3D image type by
selecting “3D MENU” > “3D Auto Change”.
(See page 55.)
1
When “3D Auto Change” is set to “Yes”
The 3D image type is detected automatically
and the appropriate 3D image is displayed.
When “3D Auto Change” is set to “No”
The following message is displayed. Press
3D ON/OFF.
3D picture is detected.
Press the 3D ON/OFF button on the remote control.
(Need to wear the 3D glasses to watch 3D picture)
•
•
1
3D MENU button
ENTER button
Adjustment buttons
('/"/\/|)
3D MENU button
3D ON/OFF button
2
Turn on the 3D Glasses and place
them over your eyes.
Press the power button for at least 2 sec-
onds.
The LED light blinks 3 times.
3
You can now view 3D images.
•
•
2
3
XV-Z17000EUS.indb53XV-Z17000EUS.indb53 2010/12/1711:16:392010/12/1711:16:39

Sharp XV-Z17000 Specifications

General

Matrix size	0.65 \
Projection distance	1.3 - 15.7 m
Vertical scan range	43 - 85 Hz
Horizontal scan range	15 - 110 kHz
Projection technology	DLP
Contrast ratio (dynamic)	40000:1
Contrast ratio (typical)	-
Screen size compatibility	40 - 500 \
Projector native resolution	1080p (1920x1080)
Aspect ratio	16:9
RS-232 ports	1
Maximum analog resolution	1600 x 1200 pixels
Maximum digital resolution	1920 x 1080 pixels
Focus	Manual
Zoom capability	Yes
Focal length range	21 - 24.2 mm
Aperture range (F-F)	2.5 - 2.7
Lamp power	250 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Supported video modes	1080i, 1080p, 480i, 480p, 540p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
Built-in speaker(s)	No
Serial interface type	RS-232
USB 2.0 ports quantity	0
Noise level	- dB
Noise level (economic mode)	23 dB
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	Black
Market positioning	Home cinema
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	8.3 W
Power consumption (typical)	353 W
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Depth	335 mm
Width	400 mm
Height	100 mm
Weight	5800 g