Sharp XV-Z17000 User Manual

-40
8 Adjusting the Bright Boost
Bright Boost uses Texas Instruments’ Bright Boost
technology. The image becomes brighter while the color
reproduction is kept at a high level.
Selectable items Description
On
The Bright Boost function is activated.
Off The Bright Boost function is not activated.
9 Selecting the Film Mode
This function provides high-quality playback of
images originally projected at 24 fps, such as movies
on DVDs.
Selectable items Description
Auto Films are detected automatically.
Off Films are not detected.
0 Setting Detail Enhancement
This function enhances the details in images and,
thereby, creates a greater sense of depth.
\ button
Provides less detail enhancement.
| button
Provides more detail enhancement.
ｑ Reducing Image Noise (DNR)
Video digital noise reduction (DNR) provides high quality
images with minimal dot crawl and cross color noise.
Selectable items Description
Off The DNR function is not activated.
Level 1
Sets the DNR level for viewing a clear-
er picture.
Level 2
Level 3
Note
• Set “DNR” to “Off” in the following cases:
- When the image is blurry.
-
When the contours and colors of moving
images drag.
- When TV broadcasts with weak signals are
projected.
• This function is available for the following
signals.
With S-VIDEO or VIDEO input:
- 480I/480P
- 576I/576P
Menu operation ⇒ Page 35
w Mosquito Noise Reduction (MNR)
The so-called Mosquito Noise (flickering) can be
reduced.
Selectable items Description
Off MNR does not function.
Level 1
Sets the MNR level for viewing a clear-
er picture.
Level 2
Level 3
Note
• Set “MNR” to “Off” in the following cases:
- When the image is blurry.
-
When the contours and colors of moving
images drag.
- When TV broadcasts with weak signals are
projected.
• This function is available for the following
signals.
With S-VIDEO or VIDEO input:
- 480I/480P
- 576I/576P
e Resetting All Adjustment Items
To reset all adjustment items to the default settings,
select “Reset” and press ENTER.
Picture Adjustment (“Picture” Menu) (Continued)
XV-Z17000EUS.indb40XV-Z17000EUS.indb40 2010/12/1711:16:322010/12/1711:16:32

Sharp XV-Z17000 Specifications

General

Matrix size	0.65 \
Projection distance	1.3 - 15.7 m
Vertical scan range	43 - 85 Hz
Horizontal scan range	15 - 110 kHz
Projection technology	DLP
Contrast ratio (dynamic)	40000:1
Contrast ratio (typical)	-
Screen size compatibility	40 - 500 \
Projector native resolution	1080p (1920x1080)
Aspect ratio	16:9
RS-232 ports	1
Maximum analog resolution	1600 x 1200 pixels
Maximum digital resolution	1920 x 1080 pixels
Focus	Manual
Zoom capability	Yes
Focal length range	21 - 24.2 mm
Aperture range (F-F)	2.5 - 2.7
Lamp power	250 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Supported video modes	1080i, 1080p, 480i, 480p, 540p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
Built-in speaker(s)	No
Serial interface type	RS-232
USB 2.0 ports quantity	0
Noise level	- dB
Noise level (economic mode)	23 dB
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	Black
Market positioning	Home cinema
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	8.3 W
Power consumption (typical)	353 W
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Depth	335 mm
Width	400 mm
Height	100 mm
Weight	5800 g