EasyManuals Logo

Sharp XV-Z17000 User Manual

Sharp XV-Z17000
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
-16
Setting Up the Projector
Setting Up the Projector
For optimal image quality, position the projector perpendicular to the screen with the projector’s feet fl at and
level.
Note
The projector lens should be centered in the middle of the screen. If the horizontal line passing through
the lens center is not perpendicular to the screen, the image will be distorted, making viewing diffi cult.
For optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly
on the screen washes out the colors, making viewing diffi cult. Close the curtains and dim the lights when
setting up the screen in a sunny or bright room.
Standard Setup (Front Projection)
Place the projector at the required distance from the screen according to the desired picture size.
Example of standard setup
Side View
Note
Refer to page 18 for additional information concerning “Screen Size and Projection Distance”.
H
L
90°
Screen
Lens center
XV-Z17000EUS.indb16XV-Z17000EUS.indb16 2010/12/1711:16:152010/12/1711:16:15

Table of Contents

Other manuals for Sharp XV-Z17000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp XV-Z17000 and is the answer not in the manual?

Sharp XV-Z17000 Specifications

General IconGeneral
Matrix size0.65 \
Projection distance1.3 - 15.7 m
Vertical scan range43 - 85 Hz
Horizontal scan range15 - 110 kHz
Projection technologyDLP
Contrast ratio (dynamic)40000:1
Contrast ratio (typical)-
Screen size compatibility40 - 500 \
Projector native resolution1080p (1920x1080)
Aspect ratio16:9
RS-232 ports1
Maximum analog resolution1600 x 1200 pixels
Maximum digital resolution1920 x 1080 pixels
FocusManual
Zoom capabilityYes
Focal length range21 - 24.2 mm
Aperture range (F-F)2.5 - 2.7
Lamp power250 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source2000 h
Service life of light source (economic mode)3000 h
Supported video modes1080i, 1080p, 480i, 480p, 540p, 576i, 576p, 720p
Analog signal format systemNTSC, PAL, SECAM
Supported graphics resolutions1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
Built-in speaker(s)No
Serial interface typeRS-232
USB 2.0 ports quantity0
Noise level- dB
Noise level (economic mode)23 dB
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorBlack
Market positioningHome cinema
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)8.3 W
Power consumption (typical)353 W
Operating temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Depth335 mm
Width400 mm
Height100 mm
Weight5800 g

Related product manuals