Shihlin electric SS2 Series User Manual

Primary Operation
Primary Operation
32
Related
Parameters
Values
Operation
Mode
Reference Source of Target
Frequency
Signal Source of Motor
Starting
Remarks
Operation
Mode
Selection
P.79
4
Combined
mode 1
（ ）
operation panel
External terminals
5
Combined
mode 2
（ ）
External voltage/current
signal, combination of
multi-speed stage levels
or frequency set by pulse
(P.82)
Press the key
FWD
or
REV
on
the operation panel.
6
Combined
mode 3
（ ）
Communication,
combination of
multi-speed stage levels
or External JOG (P.15)
External terminals
(Note )
7
Combined
mode 4
（ ）
External voltage/current
signal, combination of
multi-speed stage levels
or frequency set by pulse
(P.82)
Communication
8
Combined
mode 5
（ ）
Operation panel,
combination of
multi-speed stage levels
or external JOG(P.15)
External terminals
Note: If P.79=0, the inverter is in the external mode ( ） when starting, and the operating mode
can be shifted by setting P.79.

Shihlin electric SS2 Series Specifications

General

Brand	Shihlin electric
Model	SS2 Series
Category	Inverter
Language	English