Name Description Remark Ref.
LINK ADDRESS
Sets address of the instrument for
control via system controller.
Initial value: 6
Set value: 1 to 12
P.24
POWER BUTTON Not used in CL model* Initial value: 0 -
SELECT EVENT1 Not used in CL model* Initial value: 0 -
SELECT EVENT2 Not used in CL model* Initial value: 0 -
COOLER MODE
Changes the operation mode of the
cooler.
Initial value: 2
Set value:
0: Off 1: On 2: Auto
P.26
READY CHECK
Sets whether to wait for displaying
[READY] until the oven temperature
stabilizes at the set temperature or not.
Initial value: 1
Set value:
0: Off 1: On
P.26
READY RANGE
Sets the ready range. When the oven
temperature is within this range (°C), it
is considered to be at the set
temperature.
Initial value: 1.0
Set value:
0.1 to 1.0 °C
P.27
WAIT TIME
Sets the time (min) to elapse since the
oven temperature reaches the set
temperature range until [READY] is
displayed.
Initial value: 5
Set value:
0 to 10 minutes
P.27
FAN SPEED
Selects a rotation speed of the fan
inside the oven.
Initial value: 0
Set value: 0 to 3
P.27
ACTIVE
PREHEATER
Sets the active preheater (optional).
Initial value: 0
Set value:
0: Off 1: On
P.28
MIXER VOL
Displays or sets the volume of the
connected gradient mixer (optional).
- P.28
CTO-40C CL
21
3.4 Auxiliary Functions Screen (FUNCTION)
3
To Next Page
Loading...
General