2. Select “General Settings”
3. Select “Time zone”
4. Choose among UTC or Manual and press [ENTER]
If you choose manual:
5. Select Time Zone and press [ENTER]
6. Select the desired zone and press [ENTER] to conrm
7. Select “Daylight Saving” and press [ENTER] to enable it (it must be enabled / disabled
manually)
To change time format:
1. Open the Main Menu by pressing [MENU]
2. Select “General Settings”
3. Select “Time format”
4. Choose the date format and time format (12 / 24 h) and press [ENTER]
To Next Page
Loading...
