1. Disclaimer and warnings
This user manual is intended to describe core functionality of the chart plotter. The
information in this document is subject to change without notice. The manufacturer makes
no representations or warranties with respect to the contents hereof and specically
disclaims any implied warranties of merchantability or tness for any particular purpose. The
manufacturer reserves the right to revise this publication and to make changes from time to
time in the content hereof without obligation of the manufacturer to notify any person of such
revision or changes.
Electronic charts displayed by the device are believed to be accurate and reliable, but they
are not intended to replace ocial charts which should remain your main reference for all the
matters related to the execution of safe navigation. For this reason we would like to remind
you that you are required to carry on board and use the ocially published and approved
nautical charts.
Please be aware that the serial ports are not opto-isolated and therefore the peripherals are
electrically connected to the device. This allows the connection of high speed peripherals, like
Fish Finder. If you are connecting a NMEA0183 peripheral and you would like to isolate it from
the device, you have to add the opto-isolator externally.
If water leaks into the equipment, immediately turn o the power at the switchboard. Fire or
electrical shock can result.
If the equipment is giving o smoke or re, immediately turn o the power at the switchboard.
Fire or electrical shock can result.
Do not open the equipment. The equipment uses high voltage that can cause electrical shock.
Keep the SD card slot’s door closed to avoid water intrusion into the device
Extensive exposure to heat may result in damage to the device.
Please read through the device manual before the rst operation. If you have any questions,
please contact the Company’s customer service or your local dealer.
C-MAP media is available from C-MAP Authorized Resellers.
To Next Page
Loading...
