Si-tex Explorer Nav Pro - Function Keys Settings; Navigation Settings

51
Chart Plotter - User Manual
1. Insert micro SD card with a conguration le into the chart plotter
2. Open General Settings page
3. Select “Log&Backup”
4. Press [ENTER]
5. Select “Import conguration”
6. Conrm your action
By importing congurations from micro SD card you overwrite your current settings of the
chart plotter.
14.2 Function Keys Settings
The Keyboard includes 4 customizable keys that you can program with any function shortcut
you wish.
In order to customize a function key:
1. Open General Settings page
2. Select “Function Keys”
3. Select a function key you want to customize
4. Press [ENTER] to open list of possible values
5. Move the cursor [UP] / [DOWN] to select the desired function and conrm your choice
by pressing [ENTER] or cancel and close the list by pressing [CLEAR].
For example, if you setup F1 to “Next Page” function and long press F1 while being on map
page, it will cycle to the next page (Fish Finder page).
14.3 Navigation Settings
On navigation page you can congure the following settings for navigation:
●Static navigation: avoid boat position bouncing and disables COG
databox if the boat is stationary (boat’s SOG is under 1.1 kn)
It is recommended to turn Static navigation on:
1. Open General Settings page
2. Select “Navigation”
3. Press [ENTER]
4. Select “Static Navigation”
5. Press [ENTER]