Si-tex Explorer Nav Pro - 15 Map Settings; Course Predictor; Heading Line

54
Chart Plotter - User Manual
15. Map settings
15.1 Course Predictor
The Course predictor line is a line that starts from your boat and indicates the course direction.
It is presented on map with an innite blue dashed line. You can customize it in the Course
predictor settings:
1. On map press [CLEAR] to get to the home mode
2. Press [ENTER] to open ship menu
3. Select “Course Predictor”
4. Press [ENTER].
On the Course predictor page you can either turn course line o󰀨, or customize its length:
●innite
●by time
●by distance
To set the Course predictor length from 1 to 120 minutes:
1. Open Course Predictor page
2. Select “Time”
3. Press [ENTER]
4. Move cursor down and select “Course line time”
5. Press [ENTER]
6. Select the desired value
7. Press [ENTER]
Now the course line will be nite and its length will depend on your boat's speed.
15.2 Heading Line
The Heading line is a line that starts from the boat's bow and indicates the heading direction.
It is presented on map with an innite green solid line. You can switch the heading line ON:
1. On map press [CLEAR] to get to the home mode
2. Press [ENTER] to open ship menu
3. Select “Heading Line OFF”
4. Press [ENTER].