7.3 Waypoints
Each route is a set of waypoints. List of waypoints can be accessed either from map or from
route’s page. Waypoints can be added to route either on map or on the route’s page.
1. Open Routes page
2. Press “Add WP” on route’s page top bar menu
3. Select the way to create a waypoint – “Use x” or “Manually”
4. Press [ENTER]
Fig.7.3 – Waypoints page
“Use x” creates waypoint on x position.
“Manually” opens Lat/Lon keyboard for inputting coordinates
7.3.1 Editing waypoint’s position
To change waypoint’s latitude and longitude position in waypoints list:
1. Select the waypoint in the list of waypoints and press [ENTER]
2. Select “Edit WP position”
3. Input Lat/Lon
4. Press “OK” to save
OR
5. Press “Cancel” to exit position editing
To Next Page
Loading...
