2. Press [ENTER]
3. Select “Delete route”
4. Press [ENTER].
You can delete a waypoint a route only if it is not a current destination. To delete waypoint use
“Delete WP” option in waypoint’s contextual menu.
Reversing a route
To reverse navigation direction, use “Reverse” option in waypoints contextual menu. You can
reverse route from map only if you are in navigation mode.
Otherwise:
1. Open Main Menu - Routes
2. Select Reverse in route’s menu
3. Press [ENTER]
Extending a route
To add waypoints to the end of an existing route:
1. Place cursor on the last waypoint in the route
2. Press [ENTER]
3. Select “Extend”
4. Press [ENTER]
5. Move cursor using joystick to place new waypoint
6. Press [ENTER] to save waypoint’s position.
6.4 Easy routing
You may want to create a route in a safe way: avoiding obstacles on the route. For this
purpose there is a special option “New easy routing” that detects dangerous or non-safe
object in the area from your current position to the desired destination, and avoids them
building a safe route.
1. Place cursor at the desired start position
2. Press [ENTER]
3. Select “New Easy routing”
4. Press [ENTER].
5. Place cursor at the desired end position.
6. Press [ENTER].
A route will be created, connecting your boat position and the destination.
You can also apply this option to the existing route: it will modify the existing route leg.
To Next Page
Loading...
