Si-tex Explorer Nav Pro - Changing User Data Default Color, Symbol or Prefix

38
Chart Plotter - User Manual
7.6 Changing user data default color, symbol or prex
New route, mark, event and track will be created with default color, symbol and name with
incrementing number. To change defaults:
1. In Marks, Tracks or Routes list select “More” and press [ENTER]
2. Select “Default color and symbol” or “Default prex”
3. Save new default color and/or symbol by pressing [ENTER] on the selected color
and/or symbol
OR
4. Save new default prex by inserting it with the keyboard and pressing OK
NOTE Events and waypoints prex cannot be changed.
Displaying user data
To enable or disable all Tracks, Marks or Routes displaying on the map screen:
1. Open Marks, Tracks or Routes page
2. Select “Hide all” button to hide all user data of this type
3. Press [ENTER]
If data is hidden, the “Show all” button appears in the top bar menu. By pressing it, you can
display user data on map again.
To hide/show individual mark or track:
1. Open Marks or Tracks page
2. Select the desired mark or track in the list
3. Press [ENTER]
4. Select “Hide”
5. Press [ENTER]
To hide/show individual route:
1. Open Routes page
2. Select the desired route in the list
3. Press [ENTER]
4. Select “Hide on map” button in top bar menu
5. Press [ENTER]