Si-tex Explorer Nav Pro - Routes

32
Chart Plotter - User Manual
7.2 Routes
Routes can be created, modied or deleted in routes lists and on map. To open routes list:
1. Press [MENU]
2. Select “Routes”
3. Press [ENTER].
Fig.7.2 – Routes page
On this page you can observe all routes that are stored on your chart plotter, and open list of
waypoints of a selected route.
When you are in routes list, you can lter routes out by color, name or both.
1. Move cursor to “Filter by” and press [ENTER] to open lter window – it has a color
palette and name input eld
2. Select color by pressing [ENTER]
3. Move cursor to the name eld and press [ENTER] to open keyboard
4. Insert name and press “OK” button or press [CLEAR] to exit keyboard
5. Press [CLEAR] to close lter window.
After lter was applied, you can execute group operations over ltered routes: delete or hide
ltered routes. When there is no lter activated, group operation will be applied to all routes.
To clear lter select the cross icon in the color palette or name eld of the lter window and
press [ENTER].