7.1.1 Adding new mark
To add a mark in marks list:
1. Press “Add new” button in top bar menu
2. Select the way to create a waypoint – “Use x” or “Manually”
3. Press [ENTER]
“Use x” creates event on x position.
“Manually” opens Lat/Lon keyboard for inputting coordinates to add new mark.
Fig.7.1.1 – Marks on map
To add a mark on map:
1. Place cursor on map at desired position.
2. Press [ENTER]
3. Select “Save mark”
4. Press [ENTER]
To add an event on map:
1. Open map page.
2. Home the cursor to the boat using [CLEAR]
3. Press [ENTER]
To Next Page
Loading...
