Operating Instructions Chapter 11
C4000 Micro/Basic/Basic Plus/Eco
8009423/YT79/2016-03-14 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 61
Subject to change without notice
Ordering information
11.6 Additional front screen (weld spark guard)
• Two additional front screens (weld spark guards) supplied for each part number.
• The additional front screen fits both on the sender and on the receiver.
• The additional front screen may be used only if the curved enclosure side is accessible.
• An additional front screen reduces the scanning range of the system by 8 %. If sender
and receiver each use an additional front screen, the scanning range will be reduced
by 16 %.
Protective field height
[mm]
Part number for C4000 Basic Part number for C4000 Micro
300 2022412 2022405
450 2022413 2022406
600 2022414 2022407
750 2022415 2022408
900 2022416 2022409
1050 2022417 2022410
1200 2022418 2022411
1350 2022419 –
1500 2022420 –
1650 2022421 –
1800 2022422 –
Notes
additional front screen
(weld spark guard)
To Next Page
Loading...
Need help?
General
