SICK deTec4 C4P-EA 3SC05 Series - Response Time; Power Consumption

Minimum Typical Maximum
Cable diameter 5mm
Cable material of the system or
e
xtension connection
PUR
Extension connection Optional, female connector, M12, 5-pin
Length of cable for connecting
cables
"Length of cable", page 85
Lengths of cable for other cables on
t
he extension connection
10m
Ambient operating temperature
1)

2)

3)
-30°C +55°C
Air humidity (non-condensing) 15% 95%
Storage temperature -30°C +70°C
Housing cross-section 31mm × 34mm, plus bracket, see "Dimensional dr
aw‐
ings", page 86
Vibration resistance
4)
5…150Hz, 3,5mm/1g (EN 60068-2-6)
Shock resistance
5)
15g/6ms (EN 60068-2-27)
Class 3M4 (IEC TR 60721-4-3)
EMC According to IEC61496-1, IEC61000-6-2,
IE
C61000-6-4
1)
The temperature difference between sender and receiver must not exceed 25K.
2)
The cable belonging to the device incl. the associated connection plug must not be flexibly mounted
under –25°C
.
3)
Maximum ambient operating temperature over 1,000m above sea level: +50°C.
Maximum ambient operating temperature over 2,000m above sea level: +45°C.
4)
Test conditions per axis: 1octave/minute, 20 sweeps.
5)
Test conditions per axis: 200shocks.
13.2 Response time
Table 34: Response time for a single device
Protective field height in mm Response time in ms
Uncoded Code1 or code2
300 9 12
450 10 14
750 11 16
13.3 Power consumption
Table 35: Power consumption for sender and receiver
Protective field height in mm Typical power consumption for
sender in W
Typical power consumption for
r
eceiver in W
1)
Resolution 30mm Resolution 30mm
300 1.23 3.23
450 1.31 3.30
750 1.45 3.43
1)
Power discharged again via the OSSDs depending on the connected OSSD load must be added to the
t
able values.
13 T
ECHNICAL DATA
84
O P E R A T I N G I N S T R U C T I O N S | deTec4 C4P-EAxxx3SC05 8028570/2023-07-27 | SICK
Subject to change without notice