SICK deTec4 C4P-EA 3SC05 Series - Mounting Accessories; Weld Spark Guard; Dimensional Drawing of the Flexfix Bracket

FlexFix bracket
5,2
10,4
53
8,7
1321,8
3,5
49
31,5
30
41,1
29,7
3,7
5,2
10,2
31,5
Figure 43: Dimensional drawing of the FlexFix bracket
15.2 Mounting accessories
Table 43: Mounting accessories ordering information
Part Part number
Alignment tool 4084133
15.3 Weld spark guard
Overview
T
he weld spark guard can be used to protect the front screen of the safety light curtain.
The weld spark guard reduces the scanning range of the system by 15%.
Important information
DANGER
H
azard due to lack of effectiveness of the protective device
The weld spark guard may influence the optical properties of the safety light curtain,
leading to persons or body parts that should be protected being reflected and therefore
remaining undetected.
►
Make sure that all reflective surfaces and objects maintain the correct minimum
distance from the protective field.
ACCESSORIES 15
8028570/2023-07-27 | SICK O P E R A T I N G I N S T R U C T I O N S | deTec4 C4P-EAxxx3SC05
89
Subject to change without notice