SICK deTec4 C4P-EA 3SC05 Series - Connectors

Mounting
1
2
3
4
Figure 45: Mount the weld spark guard
1
Clean the front screen
2
Remove backing film
3
Press against the weld spark guard
4
Cut off excess ends
Further topics
•
"Minimum dis
tance to reflective surfaces", page 25
15.4 Connectors
Table 46: SP1 system plug ordering information
Connection type Type codes Part number
System connection (M12, 5-pin) 1000 2076832
System connection (M12, 8-pin) 1200 2076834
System connection (M12, 5-pin) and extension
connection (M12, 5-pin)
1100 2076833
System connection (M12, 8-pin) and extension
connection (M12, 5-pin)
1300 2076835
Table 47: Ordering information for M12 connecting cable, 5-pin (0.34mm
2
)
3)
Part Type code Part number
Female connector, straight, 2m c
able, flying
leads
YF2A15-020UB5XLEAX 2095617
Female connector, straight, 5m cable, flying
leads
YF2A15-050UB5XLEAX 2095618
Female connector, straight, 10m cable, flying
leads
YF2A15-100UB5XLEAX 2095619
Female connector, straight, 15m c
able, flying
leads
YF2A15-150UB5XLEAX 2095620
Female connector, straight, 20m cable, flying
leads
YF2A15-200UB5XLEAX 2095614
Female connector, straight, 30m cable, flying
leads
YF2A15-300UB5XLEAX 2095621
3)
Ambient oper
ating temperature: Down to −30°C with fixed installation.
ACCESSORIES 15
8028570/2023-07-27 | SICK O P E R A T I N G I N S T R U C T I O N S | deTec4 C4P-EAxxx3SC05
91
Subject to change without notice