17 List of tables
1. Formula for calculating the minimum distance from reflective surfaces............... 22
2. Lateral and rear mounting with the QuickFix bracket.............................................. 34
3. Lateral and rear mounting with the FlexFix bracket................................................. 36
4. System connection pin assignment (M12, 5-pin).................................................... 43
5. Indication of the alignment quality............................................................................48
6. Fault indicator on the sender.....................................................................................54
7. Fault indicator on the receiver................................................................................... 54
8. General system data.................................................................................................. 57
9. Technical specifications, sender................................................................................57
10. Technical specifications, receiver..............................................................................58
11. Operating data............................................................................................................ 58
12. Response time dependent on the protective field height........................................59
13. Power consumption, sender and receiver.................................................................59
14. Maximum lengths of cable for wire cross-section 0.34 mm
2
, c
opper wire............ 60
15. Weight of sender and receiver ..................................................................................60
16. Dimensions based on the protective field height, sender and receiver..................61
17. Ordering information deTec4 Core, resolution 14 mm.............................................63
18. Ordering information deTec4 Core, resolution 30 mm.............................................63
19. Brackets ordering information................................................................................... 64
20. Mounting accessories ordering information.............................................................66
21. Weld spark guard ordering information.....................................................................67
22. Ordering information for M12 connecting cable, 5-pin (0.34 mm
2
) ...................... 67
23. Ordering information, connection cable (replacement of existing devices) .......... 68
24. Distributor ordering information................................................................................ 68
25. Resistance terminal ordering information................................................................ 68
26. Ordering information for power supply......................................................................68
27. Alignment aid ordering information...........................................................................68
28. Scanning range with and without 1 or 2 deflector mirrors...................................... 70
29. Ordering information, deflector mirror PNS75..........................................................70
30. Ordering information, deflector mirror PSN125....................................................... 70
31. Ordering information for mirror columns...................................................................71
32. Ordering information for device columns..................................................................71
33. Cleaning agent ordering information.........................................................................71
34. Ordering information, test rods..................................................................................72
35. Note on specified standards......................................................................................74
LIST OF TABLES 17
8014253/ZOH3/2017-08-04 | SICK O P E R A T I N G I N S T R U C T I O N S | deTec4 Core
77
Subject to change without notice
To Next Page
Loading...