Operating Instructions Chapter 3
DME5000
8009813/ZJV1/2017-05 © SICK AG • Germany • Subject to change without notice 77
3 Safety Notes
Read the operating instructions before commissioning.
Connection, mounting and setting must be performed by qualified personnel.
Protect the DME5000 from humidity and contamination at commissioning.
The DME5000 is not a safety module pursuant to EU machinery directive.
Observe the national safety and accident prevention provisions.
Repairs must only be performed by the manufacturer. Manipulations and modifications
of the device are not permissible.
Perform wiring, open and close electrical connections only when the device is powered
down.
3.1 Laser Warning Note
Laser radiation - Do not look into the laser beam -
Laser class 2
Laser aperture
Complies with 21CFR1040.10 and 1040.11 except
for deviations pursuant to Laser Notice 50, dated
June 24, 2007.
Laser class 2 (EN/IEC 60825-1:2014)
Identical laser class for issue EN/IEC 60825-1:2007
3.2 UL
To Next Page
Loading...
