SICK DME5000 User Manual

Operating Instructions Chapter 8
DME5000
8009813/ZJV1/2017-05 © SICK AG • Germany • Subject to change without notice 99
Example
8 Example
8.1 Parameter Input at the Example "Code Input"
All parameters can be set this way.
During parameter change, the reflector must be within the field of view of the sensor.
Step 1 Apply operating voltage.
Display
Step 2
Access the menu "CODE" with .
Display
Step 3
Access the input field "CODE 000" with .
The 1st figure flashes.
Display
Step 4
Push 3 x for password "000" (parameter view only) or
enter the desired 1st figure with
(e.g. "3").
Display
Note

SICK DME5000 Specifications

General

Brand	SICK
Model	DME5000
Category	Measuring Instruments
Language	English