SICK DUSTHUNTER C200 - Accessories; Line Sender;Receiver Unit - MCU; Line from Sender;Receiver Unit to Reflector;Scattered Light Receiver; Purge Air Supply

122
8011952/YWL2/3-0/2016-08| SICKOPERATING INSTRUCTIONS | DUSTHUNTER C200
Subject to change without notice
7 SPECIFICATIONS
7.4 Accessories
7.4.1 Line sender/receiver unit - MCU
7.4.2 Line from sender/receiver unit to reflector/scattered light receiver
7.4.3 Purge air supply
7.4.4 Assembly parts
7.4.5 Device check accessories
Designation
Part No.
Connection line, length 5 m
7042017
Connection line, length 10 m
7042018
Designation
Part No.
Connection line, length 5 m
2045416
Connection line, length 10 m
2045417
Connection line, length 20 m
2048674
Designation
Part No.
Purge air hose DN 40, sold by the meter
5304683
Purge air hose DN 25, length 5 m
2046091
Purge air hose DN 25, length 10 m
7047536
Adapter 40-25
7047814
Hose clamp D20-32
7045039
Hose clamp D32-52
5300809
Designation
Part No.
Assembly kit, flange - analyzer
(for sender/receiver unit and reflector/scattered light receiver DHC-R0)
2018183
Assembly kit receiver (for reflector/scattered light receiver DHC-R1)
2060477
Designation
Part No.
Check filter set
2048676
Adjusting stand
2042907