25
8011952/YWL2/3-0/2016-08| SICK OPERATING INSTRUCTIONS | DUSTHUNTER C200
Subject to change without notice
PRODUCT DESCRIPTION 2
● MCU-P control unit with integrated purge air supply
Fig. 13: MCU-P control unit with integrated purge air supply
The purge air hose (standard lengths 5 and 10 m (see “Purge air supply”, page 122)) is a
separate part of the measuring system and must be ordered separately.
Purge air blower
Installation plate
Air filter
Power supply unit (on back of installation plate)
Optional Display module
Purge air connection
Processor board
Purge air inlet
To Next Page
Loading...
