1. Take the printout of the “MLG System Information” file.
2. Make the settings step by step in SOPAS ET by referring to the “MLG System Infor‐
mation” file.
How the “MLG System Information” is structured
The “MLG System Information” file is divided into the following sections:
■
Application notes
■
Hardware
■
Installation: see "“Installation” section", page 26.
■
Configuration > Outputs: see "“Configuration – Outputs” section", page 27
■
Configuration > Light beams: see "“Configuration – Light beams” section",
page 32
■
Configuration > Inputs: see "“Configuration – Inputs” section", page 33
■
Configuration > Data interface: see "“Configuration – Data interface” section",
page 35
The “Application notes” and “Hardware” sections are not relevant for the purpose of
configuring the MLG-2.
CONFIGURATION 7
8020351.ZLW3/2017-05-03 | SICK T E C H N I C A L I N F O R M A T I O N | The MLG-2 as a replacement product for the MLG-1 and XLG
25
Subject to change without notice
To Next Page
Loading...
