SICK MLG-2 - How to Find a New MLG-2 Light Grid as a Replacement for Your MLG-1 or XLG; Finding the Right MLG-2 Via the Type Code; Beam Separation; Detection Height

1 How to find a new MLG-2 light grid as a replacement for your MLG-1 or
XLG
1.1 Finding the right MLG-2 via the type code
1 ▾ – 0140 ▾ F8 ▾ 1 ▾ 2 ▾
Beam separation
Detection height
Interface, Connection type
Working range
Configuration mode
MLG-2:
Beam separation
Version: Prime, Pro, ProNet
Detection height
Data interface
Options (always 1)
Working range
Software Default
MLG-1:
10 ▾ A ▾ – 0140 ▾ R ▾ 1 ▾ 05 ▾ 01 ▾
Figure 1: Comparison of the MLG-1 and MLG-2 type codes
Beam separation
Table 1: Beam separation
MLG-1 MLG-2
Beam separation
Example: MLG1-xxxxxxxx
Beam separation
Example: MLG10x-xxxxxxxxxx
1: 10 mm 10: 10 mm
2: 20 mm 20: 20 mm
3: 30 mm 30: 30 mm
4: 40 mm 40: 40 mm
5: 50 mm 50: 50 mm
7: 25 mm 25: 25 mm
Detection height
Table 2: Detection height
MLG-1 MLG-2
Detection height
Example: MLGx-0100xxxx
Detection height
Example: MLGxxx0100xxxxxx
0100: 100 mm
to
3140: 3,140 mm
0100: 100 mm
to
3140: 3,140 mm
1 HOW TO FIND A NEW MLG-2 LIGHT GRID AS A REPLACEMENT FOR YOUR MLG-1 OR XLG
4
T E C H N I C A L I N F O R M A T I O N | The MLG-2 as a replacement product for the MLG-1 and XLG 8020351.ZLW3/2017-05-03 | SICK
Subject to change without notice