XLG-1 MLG-2
Type Part number Description Result
Type code
XLG2-1180I212 1048203 Beam separation 20 mm,
sensing range: 5 m, ± 1.8°
1 x RS-485, 4 x PNP-Out,
2 x PNP-In,
with terminal compartment, con‐
figuration interface
MLG20N-1180U10801
XLG3-1020F812 1046353 Beam separation: 30 mm,
sensing range: 5 m, ± 1.8°
3 x PNP-Out, 1 x PNP-In,
M12, 8-pin, configuration inter‐
face
MLG30A-1020R10801
XLG3-1470F812 1047926 Beam separation: 30 mm,
sensing range: 5 m, ± 1.8°
3 x PNP-Out, 1 x PNP-In,
M12, 8-pin, configuration inter‐
face
MLG30A-1470R10801
XLG5-1150T81 1064836 Beam separation: 50 mm,
sensing range: 5 m, ± 1.8°
1 x RS-485, 1 x PNP-Out,
1 x PNP-In,
M12, 8-pin, configuration inter‐
face
MLG50A-1150I10801
XLG5-1900I212 1048351 Beam separation: 50 mm,
sensing range: 5 m, , ± 1.8°
1 x RS-485, 4 x PNP-Out,
2 x PNP-In,
with terminal compartment, con‐
figuration interface
MLG50N-1900U10801
Special devices, customer-specific settings or no results at all
In the following cases, please contact your SICK AG sales office:
■
Your XLG-1 is a special device: XLGx-xxxxxxxxSxx (example: XLG2-1020F412S04)
■
Your XLG-1 has customer-specific settings: XLGx-xxxxxxxxKxxx (example:
XLG5-1900I212K001)
■
Despite following the procedure described in this chapter, you are unable to find
an appropriate MLG-2 variant to replace your XLG variant.
1.3 Type code and ordering information
For a detailed illustration of the type code and for further ordering information, please
refer to the relevant product information.
■
MLG-1 and XLG product information: 8014655
■
MLG-2 product information: 8017053
HOW TO FIND A NEW MLG-2 LIGHT GRID AS A REPLACEMENT FOR YOUR MLG-1 OR XLG 1
8020351.ZLW3/2017-05-03 | SICK T E C H N I C A L I N F O R M A T I O N | The MLG-2 as a replacement product for the MLG-1 and XLG
7
Subject to change without notice
To Next Page
Loading...
