SICK S3000 Cold Store

To adjust the safety laser scanners at different angles, use mounting kits 1 to 3. You
c
an check the beam path of the safety laser scanner using the LS70b scan finder (part
no. 6020756).
100 mm
Figure 19: Mounting opposite
200 mm
Figure 20: Mounting angled parallel
200 mm
Figure 21: Mounting offset parallel
100 mm
Figure 22: Mounting crosswise
200 mm
Figure 23: Mounting one device upside down, offset parallel
4 P
ROJECT PLANNING
32
O P E R A T I N G I N S T R U C T I O N S | S3000 Cold Store 8012029/ZA20/2019-11-14 | SICK
Subject to change without notice