SICK S3000 Cold Store

≈ 650 μs
< 300 μs
< 300 μs
O
SSD2
OSSD1
Figure 64: Shut-down test
< 300 μs
OSSD2
OSSD1
Figure 65: Voltage test
12.5 EFI status information and control commands
Overview
If de
vices are connected together via EFI, EFI status information and control commands
are exchanged. The following two tables show the status information that can be
retrieved and the possible control commands for the device.
NOTE
•
T
he information in square brackets reflects the names used in the CDS and in the
Flexi Soft Designer.
•
If the devices are operated in the compatibility mode, then restricted EFI status
information and control commands are available.
Status information
Table 32: Status information of the S3000 (data from the S3000)
Status information Meaning/effect
OSSD on [OSSD]
•
L
ogical 1, if the internal OSSDs of the S3000 are in
the ON state (green)
•
Logical 0, if the OSSDs of the S3000 are in the OFF
state (red)
12 TECHNICAL DATA
116
O P E R A T I N G I N S T R U C T I O N S | S3000 Cold Store 8012029/ZA20/2019-11-14 | SICK
Subject to change without notice